Top 10 CO2 Manifold 8 Way – Beer Brewing Kegs & Kegging

As an Amazon Associate I earn from qualifying purchases.

1. CRBrewBeer

#ad

Beer Gas Distributor, Air Distributor CO2 Manifold, Splitter 5/16" Barb Fittings 5 way 5/16" Barb, Gas Manifold

#ad
CRBrewBeer #ad - Shutoffs with check valves. Saves money : enables you to buy a single CO2 tank to for multiple kegs. Light and durable : aluminum body is lighter than steel but remains durable and long lasting. 5/16” barbed inlet and 5/16” barbed outlets. Mounting holes : allows for easy installation on walls or kegerators.
BrandCRBrewBeer #ad
Height50 Centimeters
Length100 Centimeters
Weight100 Kilograms
Width100 Centimeters

2. CRBrewBeer

#ad

Gas Manifold, Air Distributor CO2 Manifold, Splitter 5/16" Barb Fittings 6 way 5/16" Barb, Beer Gas Distributor

#ad
CRBrewBeer #ad - Shutoffs with check valves. Saves money : enables you to buy a single CO2 tank to for multiple kegs. 5/16” barbed inlet and 5/16” barbed outlets. Light and durable : aluminum body is lighter than steel but remains durable and long lasting. Mounting holes : allows for easy installation on walls or kegerators.
BrandCRBrewBeer #ad

3. MRbrew

#ad

MRbrew Gas Manifold, CO2 Gas Distributor, 5/16'' Barb Fitting Beer Kegerator Splitter, 4-Way Air Distributor with Integrated Check Valves & Hose Clamps

#ad
MRbrew #ad - Low cost connecting extensionthe gas manifold is designed with four 5/16’’ barb fitting outputs, which allows splitting co2 gas line from 1 output to 4 outputs to brewing keg, no need of high cost multi-connection regulator! Anti-backflow & excellent sealingthis co2 distributor has a shut off valve on 4 outputs individually, can control each outputs individually.

Indispensable tool to build a strong keg systemthis air distributor can let you carbonate four kegs at the exact same pressure setting with a regulator. Each output has a built-in check valve, which will not get backflow into the gas line if hooking up an over- or under-pressurized keg. The sealant is strong on the connection to prevent leaks perfectly. But it can not carbonate different beers simultaneously that require different carbonation pressures setting! 100% lifelong issues solving for youeach mrbrew co2 manifold is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.

It is made of quality aluminum, which is strongly against rust and corrosion, easy to clean and will last for long. Quality anti-rust materialthe beer kegerator splitter is seriously assembled with excellent quality parts and has great quality control.
BrandMRbrew #ad

4. Homebrewers Outpost

#ad

Homebrewers Outpost-D1816 Gas Manifold, 6 Way Aluminum Keg King 1/4" Barb

#ad
Homebrewers Outpost #ad - Aluminum body construction, with brass barbs & stainless shutoffs. Screw holes for easy mounting. 1/4 inch. Split your gas line to serve multiple kegs with this manifold. Splits one gas feed to six, each with their own shutoff/check valve.
BrandHomebrewers Outpost #ad
ManufacturerHomebrewers Outpost #ad
Part NumberD1816
ModelD1816

5. HBYOB

#ad

5/16" Stainless Steel Tee Barb 3 Way Co2 Splitter T

#ad
HBYOB #ad - For homebrewing and Draft Beer Systems. 5/16" barb on all sides. Stainless Steel "T". No need for more than one Co2 regulator. 3-way splitter for More than one Keg.
BrandHBYOB #ad
Part Number8541955912
Model8541955912

6. LuckyHigh

#ad

2 Way Beer CO2 Manifold Air Distributor Splitter 5/16" Barb Fittings Built-in Check Valves for Homebrew Beer Making

#ad
LuckyHigh #ad - This gas distributor can be used to split the gas supply into multiple lines. Please set the pressure on the regulator to 2 psi above the pressure required in the keg.

Each line has its own built-in shutoff valve to prevent gas backflow. 2-way gas manifold is with 5/16" threaded ports barbed inlet and 5/16" barbed outlets. It is with a 2-point screw hole on the top for easy installation to other equipment. This co2 splitter manifold is made of aluminum, brass and stainless steel material. Because of one-way valve mechanism, the pressure drop between the ball valves is approximately 2 psi.
BrandLuckyHigh #ad

7. Silkyway

#ad

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

#ad
Silkyway #ad - Money-back guarantee -customer satisfaction is our #1 policy! If you are not satisfied with our product or if you experience any issues, Please contact us. Gas manifold, machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow.

You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg. 5/16" threaded ports barbed inlet and 5/16" barbed outlets. Made of prime aluminum, brass and stainless steel material, which is extremely durable. Designed with a 2-point screw hole on the top for easy installation to other equipment.

Run with 2 lines from one CO2 source. The distributor allows you to split the gas supply into multiple lines. Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. Each line has its own shutoff valve. Chrome plated valves with spring loaded Ball check valve.
BrandSilkyway #ad

8. YB YaeBrew

#ad

YaeBrew Gas Manifold, Air Distributor CO2 Manifold, Splitter 5/16" Barb Fittings 4 Way, Beer Gas Distributor

#ad
YB YaeBrew #ad - Material: aluminum body; Barbed inlets / outlets: 5/16". 4-way co2 splitter manifold for beer kegs/lines, to maintain carbonation and pressure for draft beer from keg to faucet; can be used for breweries and commercial businesses;.

High quality 100% Brand New;. With check valves built into the beer coupler which won't make check valve failure; this built-in check valve in the beer coupler can eliminates the need for the gas manifold check valve, preventing beer system failure; with Individual shut off;. Before shipment, the manifold is Leak-checked and cleaned to ensure leak-free service and no oil residues.
BrandYB YaeBrew #ad

9. CRBrewBeer

#ad

Splitter 5/16" Barb Fittings 4 way 5/16" Barb, Gas Manifold, Beer Gas Distributor, Air Distributor CO2 Manifold

#ad
CRBrewBeer #ad - No leaks & independent shunt: the integrated check valves can prevent backflow of gas or liquid and protect your splitter. And the barb of shutoff valve can connect with your keg by hose to achieve carbonating beer.

5/16” barbed inlet and 5/16” barbed outlets. Professional-quality, 4-way co2 splitter for beer kegs/lines; used for maintaining carbonation and pressure for the dispensing of draft beer from keg to faucet; aluminum body; this manifold is the same product sold to breweries and commercial businesses. A gas manifold can split the delivery of CO2 into several parts to serve the draft beer system.

Easy to use: the gas manifold come with 5/16" barb od outlets & inlets. Inlet barb can connect with CO2 tank by hose. Faster to install:just need two screws or nails, you can easily secure this gas manifold on walls or kegerators. Every switch valve has their handles to control the gas flow, so each gas line will not affect the airflow of other kegs.
BrandCRBrewBeer #ad

10. Homebrewers Outpost

#ad

D1802 Gas Manifold, Homebrewers Outpost, 2 Way Aluminum Keg King 1/4" Barb

#ad
Homebrewers Outpost #ad - 1/4 inch. Split your gas line to serve multiple kegs with this manifold. Aluminum body construction, with brass barbs & stainless shutoffs. Screw holes for easy mounting. Splits one gas feed to two, each with their own shutoff/check valve.
BrandHomebrewers Outpost #ad
ManufacturerHomebrewers Outpost #ad
Part NumberD1802
ModelD1802