ICT Billet Radiator Hose Barb Coupler with 1/8″ NPT Port 1-1/4″ Steam Tube Adapter for LS Swap Steam/Coolant Crossover Splice Made in the USA Billet Aluminum AN627-20X125

#ad
ICT Billet #ad - Compatible with 1-1/4" upper radiator hoses factory LS vehicle size. Machined aluminum finish. Made in wichita, kansas from aerospace grade, USA produced billet aluminum. Package includes: 1 hose barb coupler. Hose barb reducer coupler with 1/8" npt side port conveniently add a 1/8" npt port into your top radiator hose integrated 1/8" NPT port for steam port recirculation or other gauge connections Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum Package Includes: 1 hose barb coupler Conveniently add a 1/8" npT port into your top radiator hose to feed your cylinder head crossover tube to.

ICT Billet Radiator Hose Barb Coupler with 1/8" NPT Port 1-1/4" Steam Tube Adapter for LS Swap Steam/Coolant Crossover Splice Made in the USA Billet Aluminum AN627-20X125 #ad - . 1-1/4" to 1-1/4" O. D.

#ad



EDGE INDUSTRIAL 1/4" Hose ID to 1/8" Male NPT MNPT 90 Degree Elbow Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 01

#ad
EDGE INDUSTRIAL #ad - EDGE INDUSTRIAL 1/4" Hose ID to 1/8" Male NPT MNPT 90 Degree Elbow Brass Fitting Fuel / AIR / Water / Oil / Gas / WOG Qty 01 #ad - Backed by edGE Industrial full manufacturers warranty. 150 psi maximum working pressure. Not for use with potable water. Please note, 1/8" npt measures 0405" outside thread diameter in linear inches. Not for potable water. Not deemed lead free. Not deemed lead free. Please review our attached npt sizing chart to cross reference NPT thread size to linear inches 1/4" hose id x 1/8" male npt brass 90 Degree Elbow Barb Fitting.

40° to 160° temperature rating. 150 psi maximum working pressure, -40° to 160° Temperature Rating. Please note: npt thread size is NOT determined by its outside thread diameter in inches. 1/4" hose id x 1/8" male npt brass 90 Degree Elbow Barb Fitting.

#ad



Anderson Metals 57001-0402 Brass Hose Fitting, Adapter, 1/4" Barb x 1/8" NPT Male Pipe

#ad
Anderson Metals 57001-0402 #ad - And its territories. The company, is headquartered in Kansas City, founded in 1951, MO. They are made of brass, galvanized steel, and other materials that resist corrosion, stainless steel, pressure, and wear. Not deemed lead free. Backed by edGE Industrial full manufacturers warranty. Hose fittings have various types of connections, dry disconnect, including threaded, barbed, push-to-connect, and others including those based on internationally-accepted specifications.

. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Hose barb on one end and male NPT threads on the other. Not for potable water. Adapter for connecting a hose to a male threaded connection of a different diameter. 1/4" hose id x 1/8" male npt brass 90 Degree Elbow Barb Fitting.

Anderson Metals 57001-0402 Brass Hose Fitting, Adapter, 1/4" Barb x 1/8" NPT Male Pipe #ad - Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. Hose fittings are used in systems such as air compressors, firefighting, and tire installation in industries including agriculture, automatic manufacturing operations, mining, road construction, aircraft controls, and aviation.

Anderson metals manufactures brass fittings, valves, and pipe nipples. Please note, 1/8" npt measures 0405" outside thread diameter in linear inches.

#ad



ICT Billet 1-1/4" to 1-1/2" Inch Hose Barb Splice Coupler Repair Reducer Fitting Adapter Connector Radiator Coolant Intercooler Heat Exchanger Fluid Manufactured in USA Aluminum AN627-21A

#ad
ICT Billet #ad - Hose barb on one end and male NPT threads on the other. Not for potable water. Please note, 1/8" npt measures 0405" outside thread diameter in linear inches. Commonly used to couple or repair your radiator hose, brake booster hose, vacuum line,  or any other hoses together. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Backed by edGE Industrial full manufacturers warranty. Made in wichita, kansas from aerospace grade, usa produced billet aluminum Bare aluminum finish This Package Includes 1 hose barb splice 1/4" hose id x 1/8" male npt brass 90 Degree Elbow Barb Fitting. Made in wichita, usa produced, Kansas from aerospace grade, billet aluminum.

ICT Billet 1-1/4" to 1-1/2" Inch Hose Barb Splice Coupler Repair Reducer Fitting Adapter Connector Radiator Coolant Intercooler Heat Exchanger Fluid Manufactured in USA Aluminum AN627-21A #ad - Package includes 1 coupler. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U. S. A. Not deemed lead free. Adapter for connecting a hose to a male threaded connection of a different diameter. Hose barb reducer coupler this fitting has a 1-1/4" barb and a 1-1/2" barb with a hose stop flange to keep the coupler centered in the splice connection.

150 psi maximum working pressure, -40° to 160° Temperature Rating.

#ad



ICT Billet LS Engine Swap M16 1.5 Adapter to 1/8 NPT Oil Pressure Sensor LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551172

#ad
ICT Billet 5864172859 #ad - Not deemed lead free. Male m16-1. 5 to female 1/8"-27 npt adapter this adapter installs most commonly in the top-rear, or front-driver side of the engine block to access pressurized oil of the engine. Hose barb on one end and male NPT threads on the other. Please note, 1/8" npt measures 0405" outside thread diameter in linear inches.

Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. Backed by edGE Industrial full manufacturers warranty. Made in wichita, Kansas from aerospace grade, usa produced, billet aluminum. Package includes 1 coupler. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

ICT Billet LS Engine Swap M16 1.5 Adapter to 1/8 NPT Oil Pressure Sensor LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 551172 #ad - Seals to the block with a sealing washer. Not for potable water. 150 psi maximum working pressure, -40° to 160° Temperature Rating. Compatible with: all gm ls series engines oil pressure sensor adapter includes: 1 aluminum adapter, 1 sealing washer Made in Wichita, USA produced, Kansas from aerospace grade,  billet aluminum  1/4" hose id x 1/8" male npt brass 90 Degree Elbow Barb Fitting.

Adapter for connecting a hose to a male threaded connection of a different diameter. Sold individually with 1 sealing washer.

#ad



ISPEEDY For LS Truck EVAP Purge Solenoid Tube Plug Intake Block Off Plates 4.8 5.3 6.0

#ad
Ispeedy #ad - Not for potable water. Fit:ls lt truck lsx 4. 8l 5. 3l 6. 0l v8. Adapter for connecting a hose to a male threaded connection of a different diameter. Vehicle fitment: chevrolet gmc avalanche express silverado suburban Yukon Sierra Tahoe 1500 2500 Fit:LS LT Truck LSX 4. 8l 5. 3l 6. 0l v8. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

S. A. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. Hose barb on one end and male NPT threads on the other. Made in wichita, Kansas from aerospace grade, usa produced, billet aluminum. Package includes 1 coupler. Seals to the block with a sealing washer. 1/8" npt taper pipe thread port in the rear of the fitting allows for common sensors or plumbing fittings.

ISPEEDY For LS Truck EVAP Purge Solenoid Tube Plug Intake Block Off Plates 4.8 5.3 6.0 #ad - Made in wichita, Kansas from aerospace grade, usa produced, billet aluminum. Compatible with: all GM LS Series Engines. 150 psi maximum working pressure, -40° to 160° Temperature Rating. And its territories.

#ad



ICT Billet 1-1/4" to 1-1/4" Inch Hose Barb Splice Coupler Repair Fitting Adapter Connector Radiator Coolant Intercooler Heat Exchanger Fluid Designed & Manufactured in USA Bare Aluminum AN627-20A

#ad
ICT Billet #ad - Not deemed lead free. Commonly used to couple or repair your radiator hose, brake booster hose, vacuum line,  or any other hoses together. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Sold individually with 1 sealing washer. And its territories. This fitting has a 1-1/4" barb and a 1-1/2" barb with a hose stop flange to keep the coupler centered in the splice connection.

Commonly used to couple or repair your radiator hose, brake booster hose, vacuum line, or any other hoses together. Machined aluminum finish. Comes with O ring and bolt. Ntended for off road use only. Made in wichita, Kansas from aerospace grade, usa produced, billet aluminum. Package includes 1 coupler. Ls truck intake manifold EVAP block off kit.

ICT Billet 1-1/4" to 1-1/4" Inch Hose Barb Splice Coupler Repair Fitting Adapter Connector Radiator Coolant Intercooler Heat Exchanger Fluid Designed & Manufactured in USA Bare Aluminum AN627-20A #ad - For use with all ls truck intake manifolds that originally came with an EVAP system. Cnc milled from aircraft grade Billet aluminum. Not for potable water. Made in wichita, kansas from aerospace grade, usa produced billet aluminum Bare aluminum finish This Package Includes 1 hose barb splice 1/4" hose id x 1/8" male npt brass 90 Degree Elbow Barb Fitting.

#ad



ICT Billet LS Engine Swap M12 1.5 Adapter to 3/8 NPT Extended Length Coolant Temperature Sensor Adapter Water LS Engine Swap LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 551179L

#ad
ICT Billet #ad - Factory ls cylinder heads are machined with metric m12-1. 5 coolant sensor ports, so your factory Small Block Chevy sensor won't thread in to them. Most aftermarket gauges will use a 3/8" npt thread adapter usually included with gauge 1/4" hose id x 1/8" male npt brass 90 Degree Elbow Barb Fitting. Backed by edGE Industrial full manufacturers warranty.

Use pn# 551179 for. 85" deep adapter for shorter sensors. Hose barb on one end and male NPT threads on the other. This adapter will fit all LS series engines. Adapters are sold individually, and include 1 sealing washer. Adapter for connecting a hose to a male threaded connection of a different diameter. Please note, 1/8" npt measures 0

ICT Billet LS Engine Swap M12 1.5 Adapter to 3/8 NPT Extended Length Coolant Temperature Sensor Adapter Water LS Engine Swap LS1 LS3 LS2 LQ4 LQ9 LS6 L92 L99 L33 LR4 551179L #ad - 405" outside thread diameter in linear inches. Not deemed lead free. Comes with O ring and bolt. Ntended for off road use only. Extended length Adapter - Male M12-1. 5 to female 3/8"-18 npt adapter     this adapts sbc/bbc 3/8" npt coolant temperature sensors to fit into ls series cylinder heads Compatible with: all GM LS Series Engines Made in Wichita, USA produced, Kansas from aerospace grade, billet aluminum Includes: 1 aluminum adapter, 1 sealing washer Will fit sensors with 1.

#ad



ICT Billet LS Stacked Coolant Steam Crossover Tube for 3 Bolt DBC DBW Gen 3 Throttle Body Stainless Steel Braided Hose Kit LS1 LSX LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 551675

#ad
ICT Billet #ad - Backed by edGE Industrial full manufacturers warranty. Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. This adapter installs most commonly in the top-rear, or front-driver side of the engine block to access pressurized oil of the engine. This adapter will fit all LS series engines.

Adapters are sold individually, and include 1 sealing washer. Made in wichita, kS from aerospace grade, USA billet aluminum. Refer to thread chart to check your correct fitting size. Passenger side port adapter has two 1/8"npt ports, drivers side port adapter has one 1/8"npt port. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.

ICT Billet LS Stacked Coolant Steam Crossover Tube for 3 Bolt DBC DBW Gen 3 Throttle Body Stainless Steel Braided Hose Kit LS1 LSX LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 551675 #ad - S. A. This adapter allows you to keep your original sensors and integrate them into your swapped LS engine. Adapter has a female 3/8" npt port, 1. 7" deep. Factory ls cylinder heads are machined with metric m12-1. 5 coolant sensor ports, so your factory Small Block Chevy sensor won't thread in to them. And its territories.

#ad



ACDelco 12551708 GM Original Equipment Engine Coolant Temperature Sensor

#ad
ACDelco 12551708 #ad - Fit:ls lt truck lsx 4. 8l 5. 3l 6. 0l v8. Vehicle fitment: chevrolet gmc avalanche express silverado suburban Yukon Sierra Tahoe 1500 2500 Fit:LS LT Truck LSX 4. 8l 5. 3l 6. 0l v8. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Adapter for connecting a hose to a male threaded connection of a different diameter.

Offering the quality, reliability, and durability of GM OE. Hose barb on one end and male NPT threads on the other. Can be installed on the front or rear of the cylinder heads. Sold individually with 1 sealing washer. Backed by edGE Industrial full manufacturers warranty. The engine temperature signal is used by the engine control module to adjust the air/fuel mixture and ignition timing.

ACDelco 12551708 GM Original Equipment Engine Coolant Temperature Sensor #ad - This fitting has a 1-1/4" barb on both sides of the fitting with a hose stop flange to keep the coupler centered in the splice connection. Commonly used to couple or repair your radiator hose, brake booster hose, vacuum line, or any other hoses together. Machined aluminum finish. Made in wichita, kS from aerospace grade, USA billet aluminum.

This adapter installs most commonly in the top-rear, or front-driver side of the engine block to access pressurized oil of the engine.

#ad



A-Team Performance LS LT Heater Core Bypass Delete Hose With Clamps Coolant Crossover Compatible with Chevrolet GM Pontiac LS LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4

#ad
A-Team Performance #ad - A-team performance ls lt heater core bypass delete hose with clamps coolant crossover compatible with chevrolet GM Pontiac LS LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4A Heater core bypass/delete hose designed with thick 4 ply high temperature and high-pressure silicone with a glossy black finish. Sold individually with 1 sealing washer.

A-Team Performance LS LT Heater Core Bypass Delete Hose With Clamps Coolant Crossover Compatible with Chevrolet GM Pontiac LS LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4 #ad - Comes with O ring and bolt. Ntended for off road use only. Not deemed lead free. Refer to thread chart to check your correct fitting size. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Please note, 1/8" npt measures 0405" outside thread diameter in linear inches.

Gm-recommended replacement part for your GM vehicle's original factory component. Compatible with all GM LS series engines. This adapter installs most commonly in the top-rear, or front-driver side of the engine block to access pressurized oil of the engine. Fit:ls lt truck lsx 4. 8l 5. 3l 6. 0l v8.

#ad